Description: Upgrade V4.2.7 Silent Mainboard for Creality Ender-3 Pro / V2 3D PrinterNote：There is no CREALITY logo on the motherboard. This is not a CREALITY brand silent motherboard. Name： Motherboard KitModel： Ender-3/Ender-3 proAccessory Category : 3D Printer Assembly Item Leader/Brand Accessory Type: Value-added accessoriesMain Function ： Upgrade the original motherboard, motor drive upgrade to silent drive, reduce the noise of motor operation during printing.Main parameters: 1. size: 100.6x70 2. motor drive: TMC2209 (X / Y / Z / E) 3. material: fiberglassSelling points : ① with Ender-3/Ender-3 pro adaptable, easy to install ② drive chip upgraded to silent TMC2209 chip, the motor runs more smoothly, the noise is lower and quieter, noise value ≤ 50db ③Upgrade to 32-bit MCU main control chip, graphics processing efficiency is higher.Note: 1. Can not be used in addition to Ender-3/Ender-3 pro models, the use of attention to the surrounding static electricity impact (* motherboard pre-installed with CR-touch function Ender-3 pro firmware)Recommended temperature: 0~60℃ (too high temperature will cause damage to electronic components, too low temperature will make the motherboard can not start normally)Packing method Paper box Packing size (cm) : 150×115×45mmActual weight kg (including packaging): 0.116 Feature: Attention1. The motherboard pre-brush Ender-3 pro firmware (* with CR-TOUCH), for Ender-3/Ender-3 pro machine can be directly replaced with use2. For other models, such as Ender-5, Ender-3 v2, etc., can not be used, please do not try to creality firmware into the motherboard, otherwise the machine will not be able to control the use of the machine, the blue screen, the temperature of the abnormalities, etc. 3. Before powering on the need to check the motherboard upper limit switch is in the “1 '3. Otherwise, the machine will be returned to zero X-axis impact phenomenon.4. Pay attention to the “+” wiring or the motherboard will be damaged. 1. Check whether the switch here is at “1” during installation, if you find that it is not set at “1”, please manually toggle it to “1” (* If the switch is at “on”, the X-axis will crash). (* If the switch is in the “on”, the printer is used to return to zero, the X-axis will be hit)2. Customers can install CR-TOUCH or BL-TOUCH according to their own needs, the cable into the 5pin connector position here (* for the use of separate cable BL-TOUCH users, please make sure you understand how to wire, otherwise it is not recommended to use) (*Note: when wiring need to pay attention to the positive and negative “+-”, connecting the wrong will lead to the corresponding parts burned or damaged port, serious damage to the motherboard, you need to check the wiring before powering on the good) Adopts 32-bit master control chip, providing faster and more efficient drawing processing speed and faster printer response (*Ender 3 original machine is 8-bit master control chip) Each driver chip has an aluminum alloy heat sink, which provides protection when the printer is operating under high load, and quickly conducts heat out, preventing the driver chip from accumulating heat, which may cause the motor to lose steps/misalignments, etc., and thus print the model accordingly (*The TMC2209 driver chip is underneath the heat sink)
Price: 45.99 USD
Location: New Jersey/Los Angeles
End Time: 2024-12-11T20:09:32.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Unbranded
Type: Motherboard
MPN: Does Not Apply
Compatible Model: For Ender 3 Pro
Compatible Brand: CREALITY
