Transmitter Adapter 5.0 Bluetooth Receiver Wireless Jack 3.5mm Aux Audio 2 in 1

Description: Transmitter Adapter 5.0 Bluetooth Receiver Wireless Jack 3.5mm Aux Audio 2 in 1 Descriptions: Recommended uses: Bluetooth transmitter mode -> add Bluetooth function to your TV, PC, etc. Stream audio to Bluetooth headphones/ speakers. add Bluetooth function to a wired speaker, sound bar, home theatre etc. Receive audio wirelessly from any Bluetooth audio device. e.g.Pc, mobile phone etc. How to Use： Connect the device with a 3.5mm interface, press and hold the power switch for 3 seconds. When using the receiving mode, search for B-10S and connect. When using the transmit mode, turn on the Bluetooth headset or speaker, and it will automatically pair. Note that when switching modes, turn off the device first Support audio equipment with audio input interface to realize wireless audio reception and transmission. Support automatic search and connection of bluetooth-compatible devices to achieve wireless audio transmission. Built-in AEC echo cancellation and ANC noise cancellation circuit. Built-in enhanced signal transmission circuit, faster and more stable connection. Compatible with dual lossless audio formats. Support AUX IN/OUT. Automatic memory connection function. Built-in battery, long battery life. Smart Compatibility, Android, IOS system phones and PADs, and all bluetooth-compatible audio devices. The launch state supports the one-to-two function. Stereo supported in transmit mode. Fine workmanship and good performance. Easy to use. Long service life. TX mode: 1. Please use the Micro USB cable to charge first. 2. Use the AUX cable to connect the B-10S to your audio device. 3. Change the switch button to TX position. 4. Press and hold the multifunction button, then the red light will flash rapidly. 5. Turn on the device to be connected and the B-10S will automatically connect successfully and the red light will illuminate. RX mode: 1. Please use Micro USB cable to charge before use. 2. Connect the B-10S to your audio device using the AUX cable. 3. Change the switch button to RX position. 4. Turn on the device (long press the multi-function button) and the blue light will flash quickly to indicate that it is ready for pairing. 5. Find the B-10S in your phones wireless search, and then select pairing. Specifications: Bluetooth Version: V5.3 Charging Time: About 2 hours Charging Voltage: DC 5V Bluetooth Range: Up To 33 feet (10 meters) Bluetooth Distance: 10m (open space) Supported protocol: A2DP, AVRCP Input/Output Connecting mode: 3.5mm stereo audio port Package included: 1x Bluetooth Receiver Transmitter 1x 3.5mm Connector 1x Charging Cable 1x Instruction Manual

Price: 7.05 USD

Location: anqing

End Time: 2024-11-30T11:20:37.000Z

Shipping Cost: 0 USD