TBS Team BlackSheep Unify Pro 5.8ghz Video Transmitter VTX FPV (HV SMA) 25-800mw

Description: 100% OriginalFair PricingFast ShippingBUY NOW!For purchases exceeding $200 USD, we kindly request either a valid tax identification number or the accurate phone number to facilitate import duty procedures. The European Union has enforced an import tax policy.TBS Team BlackSheep Unify Pro 5.8ghz Video Transmitter VTX FPV (HV SMA) 25-800mw Package includes : 1x TBS UNIFY PRO 5G8 HV Video transmitter 1x Video Transmitter / Camera / Power cable 1x TBS UNIFY Pro Manual (Download here) ** SMA Connector ** Summary The TBS Unify is a new line of video transmitters, optimized for compatibility across multiple platforms and reduced to a small form factor, completely redesigned and tailored for FPV use. Perfect for small multi rotor platforms or in applications where flight times are critical. Features Worlds lightest 40ch video transmitter line Extremely powerful - with integrated Heatsink 25mW* (up to 800mW with HAM license) One button frequency and power setup OSD configuration using TBS Smartaudio (PNP PRO OSD) 5V input or 2-6S input with 5V output versions available Solder-on module dimensions available on request Details The most popular, most powerful video transmitter on the market just got a "bigger" brother. It can be connected directly to up to 6S of battery-juice and do 5V output for your camera. It will filter the power and make sure you get clean video, even without being connected to a TBS CORE or TBS PowerCube. With a brand new active output power monitor, we ensure that you'll always meet the race requirements, while giving you the best possible picture. With only 7g and a 31x22x6mm form factor, your quad will barely notice it's there. The 25mW - 800mW adjustable output power allows you to race with friends and penetrate serious concrete with just a few pushes of a button. The 40CH coverage gives you the freedom to fly at any race without having to resort to video transmitter swapping practices (*). PITMODE - MADE TO RACE Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. SMARTAUDIO - FULL CONTROL SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility! CLEANSWITCH - NEIGHBOR FRIENDLY CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :) SAY NO! TO DIPSWITCHES Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. Specification : Operating Voltage: 2S - 6S Supply current: up to 600mA Operating Temperature: watch for normal airflow Audio carrier Frequency: 6.5 MHz Video Input Impedance: 75 Ohm Weight: 5g Video Format: NTSC/PAL Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*) Payment Shipping Returns Secure & Easy Ordering. Orders can be placed online using PayPal to ensure a safe and secure transaction and guarantee you privacy. The address in Paypal is the address your order will be shipped to. We are only able to dispatch goods once payment has cleared. All refunds are issued via PayPal only. Fast worldwide shipping with tracking number. We reserve the right not to ship to any unconfirmed PayPal addresses. Shipments usually takes 5-15 working days to your PayPal registered address. ITALY, ISRAEL, SPAIN, GERMANY, EASTERN EUROPE, SOUTH AMERICA, AFRICA AND MIDDLE EAST may take from 10-25 days due the slow postal services and strict custom clearances. After receiving the item, contact us within : 30 Days Refund will be given as : Money back or item exchange (buyer's choice) Return shipping : Buyer pays return shipping100% OriginalFair PricingFast ShippingPackage includes : 1x TBS UNIFY PRO 5G8 HV Video transmitter 1x Video Transmitter / Camera / Power cable 1x TBS UNIFY Pro Manual (Download here) ** SMA Connector ** Summary The TBS Unify is a new line of video transmitters, optimized for compatibility across multiple platforms and reduced to a small form factor, completely redesigned and tailored for FPV use. Perfect for small multi rotor platforms or in applications where flight times are critical. Features Worlds lightest 40ch video transmitter line Extremely powerful - with integrated Heatsink 25mW* (up to 800mW with HAM license) One button frequency and power setup OSD configuration using TBS Smartaudio (PNP PRO OSD) 5V input or 2-6S input with 5V output versions available Solder-on module dimensions available on request Details The most popular, most powerful video transmitter on the market just got a "bigger" brother. It can be connected directly to up to 6S of battery-juice and do 5V output for your camera. It will filter the power and make sure you get clean video, even without being connected to a TBS CORE or TBS PowerCube. With a brand new active output power monitor, we ensure that you'll always meet the race requirements, while giving you the best possible picture. With only 7g and a 31x22x6mm form factor, your quad will barely notice it's there. The 25mW - 800mW adjustable output power allows you to race with friends and penetrate serious concrete with just a few pushes of a button. The 40CH coverage gives you the freedom to fly at any race without having to resort to video transmitter swapping practices (*). PITMODE - MADE TO RACE Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. SMARTAUDIO - FULL CONTROL SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility! CLEANSWITCH - NEIGHBOR FRIENDLY CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :) SAY NO! TO DIPSWITCHES Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. Specification : Operating Voltage: 2S - 6S Supply current: up to 600mA Operating Temperature: watch for normal airflow Audio carrier Frequency: 6.5 MHz Video Input Impedance: 75 Ohm Weight: 5g Video Format: NTSC/PAL Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*) 100% OriginalBUY NOW!For purchases exceeding $200 USD, we kindly request either a valid tax identification number or the accurate phone number to facilitate import duty procedures. The European Union has enforced an import tax policy.TBS Team BlackSheep Unify Pro 5.8ghz Video Transmitter VTX FPV (HV SMA) 25-800mw Package includes : 1x TBS UNIFY PRO 5G8 HV Video transmitter 1x Video Transmitter / Camera / Power cable 1x TBS UNIFY Pro Manual (Download here) ** SMA Connector ** Summary The TBS Unify is a new line of video transmitters, optimized for compatibility across multiple platforms and reduced to a small form factor, completely redesigned and tailored for FPV use. Perfect for small multi rotor platforms or in applications where flight times are critical. Features Worlds lightest 40ch video transmitter line Extremely powerful - with integrated Heatsink 25mW* (up to 800mW with HAM license) One button frequency and power setup OSD configuration using TBS Smartaudio (PNP PRO OSD) 5V input or 2-6S input with 5V output versions available Solder-on module dimensions available on request Details The most popular, most powerful video transmitter on the market just got a "bigger" brother. It can be connected directly to up to 6S of battery-juice and do 5V output for your camera. It will filter the power and make sure you get clean video, even without being connected to a TBS CORE or TBS PowerCube. With a brand new active output power monitor, we ensure that you'll always meet the race requirements, while giving you the best possible picture. With only 7g and a 31x22x6mm form factor, your quad will barely notice it's there. The 25mW - 800mW adjustable output power allows you to race with friends and penetrate serious concrete with just a few pushes of a button. The 40CH coverage gives you the freedom to fly at any race without having to resort to video transmitter swapping practices (*). PITMODE - MADE TO RACE Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. SMARTAUDIO - FULL CONTROL SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility! CLEANSWITCH - NEIGHBOR FRIENDLY CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :) SAY NO! TO DIPSWITCHES Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. Specification : Operating Voltage: 2S - 6S Supply current: up to 600mA Operating Temperature: watch for normal airflow Audio carrier Frequency: 6.5 MHz Video Input Impedance: 75 Ohm Weight: 5g Video Format: NTSC/PAL Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*) Payment Secure & Easy Ordering. Orders can be placed online using PayPal to ensure a safe and secure transaction and guarantee you privacy. The address in Paypal is the address your order will be shipped to. We are only able to dispatch goods once payment has cleared. All refunds are issued via PayPal only. Shipping Fast worldwide shipping with tracking number. We reserve the right not to ship to any unconfirmed PayPal addresses. Shipments usually takes 5-15 working days to your PayPal registered address. ITALY, ISRAEL, SPAIN, GERMANY, EASTERN EUROPE, SOUTH AMERICA, AFRICA AND MIDDLE EAST may take from 10-25 days due the slow postal services and strict custom clearances. Returns After receiving the item, contact us within : 30 Days Refund will be given as : Money back or item exchange (buyer's choice) Return shipping : Buyer pays return shipping100% OriginalFast ShippingFair Pricing Package includes : 1x TBS UNIFY PRO 5G8 HV Video transmitter 1x Video Transmitter / Camera / Power cable 1x TBS UNIFY Pro Manual (Download here) ** SMA Connector ** Summary The TBS Unify is a new line of video transmitters, optimized for compatibility across multiple platforms and reduced to a small form factor, completely redesigned and tailored for FPV use. Perfect for small multi rotor platforms or in applications where flight times are critical. Features Worlds lightest 40ch video transmitter line Extremely powerful - with integrated Heatsink 25mW* (up to 800mW with HAM license) One button frequency and power setup OSD configuration using TBS Smartaudio (PNP PRO OSD) 5V input or 2-6S input with 5V output versions available Solder-on module dimensions available on request Details The most popular, most powerful video transmitter on the market just got a "bigger" brother. It can be connected directly to up to 6S of battery-juice and do 5V output for your camera. It will filter the power and make sure you get clean video, even without being connected to a TBS CORE or TBS PowerCube. With a brand new active output power monitor, we ensure that you'll always meet the race requirements, while giving you the best possible picture. With only 7g and a 31x22x6mm form factor, your quad will barely notice it's there. The 25mW - 800mW adjustable output power allows you to race with friends and penetrate serious concrete with just a few pushes of a button. The 40CH coverage gives you the freedom to fly at any race without having to resort to video transmitter swapping practices (*). PITMODE - MADE TO RACE Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. SMARTAUDIO - FULL CONTROL SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility! CLEANSWITCH - NEIGHBOR FRIENDLY CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :) SAY NO! TO DIPSWITCHES Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. Specification : Operating Voltage: 2S - 6S Supply current: up to 600mA Operating Temperature: watch for normal airflow Audio carrier Frequency: 6.5 MHz Video Input Impedance: 75 Ohm Weight: 5g Video Format: NTSC/PAL Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*)

Price: 49.95 USD

Location: default, default

End Time: 2024-08-23T09:12:19.000Z

Shipping Cost: 10 USD