SUNLU ABS 3D Printer Filament Tough ABS 1.75mm 1KG/Spool No Bubble +/-0.02mm Lot

Description: Note: The new reel weighs 0.9KG, and the old plastics reel weighs 1KG. SUNLU ABS 1KG/Roll 1.75MM Excellent impact strength and wear resistance; Chemical resistance, dyeability, good molding and machining effects; The support is easy to peel off; It is applicable to equipment with heating device on the base plate. It can print models that require strong printing strength and require subsequent processing, such as dyeing, polishing, electroplating, etc. It is suitable for printing small parts. 【ABS Strong 3D Filament】SUNLU ABS 3D filament is a type of strong and durable filament, ideal for printing durable items or functional parts that require higher heat resistance. Strong and Durable ABS Filaments, Made of commonly used ABS, a strong thermoplastic material—great for creating durable items that require a higher resistance to heat. ABS can be used for full functional models, and is the closest material to real production models. Wire diameter Tolerance Printing temperature Bottom plate temperature Rally (KGF) Melt index Elongation at break Printing speed Net weight Length 1.75 mm ±0.02MM 250-260℃ 80-100℃ (Better with thermal insulation chamber) 6-11 12-19g/10min (220℃, 10Kg) 25 % 40-60MM/s 1KG/ROLL 395m 【Super Neat Filament Spool】SUNLU 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use. 【1KG-Filament Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers. 【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers. Environmentally friendly and non-toxic. Filament Storage Tips: We recommended storing filament in a sealed plastic bag or box after each print (a large ziplock or Tupperware works well). In extreme cases where the filament gets damp, you can bake it in an oven with 50-degree Celsius for about an hour to restore its dryness. Each time after use of your 3D Printer Filament. Be sure to insert the free end of the filament into the hole to avoid the filament being tangled for next time use. Contact us The best way to contact us is by eBay messages.We always reply eBay messages that are sent to us with an inquiry, usually within 24 hours of receipt or sooner. We will answer all eBay messages during our business hours. (Monday - Friday 9:00 am to 6:00 pm HKT except all Holidays)Please do not leave any low detailed seller ratings, neutral or negative feedback before contacting us.We commit you 100% satisfaction guarantee. Feedback 1. We will appreciate a positive feedback with all 5 star rating when you are satisfied. 2. Our goal is to make sure you are a happy buyer and have a pleasant shopping experience with us. 3. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute. 4. We understand the concerns and frustrations that occasionally occur, and appreciate the opportunity to assist you in resolving any problem associated with your purchases. On Aug 14, 2024 at 21:47:48 PDT, seller added the following information:

Price: 18.5 USD

Location: Hebron, Kentucky

End Time: 2024-09-29T06:49:47.000Z

Shipping Cost: 0 USD

Product Images

Item Specifics

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Return policy details:

MPN: ABS-1KG

Compatible Model: For 3D Systems CubePro, For 3D Systems ProJet 1200, For Airwolf 3D AXIOM, For Airwolf 3D AXIOM Dual Extruder, For Airwolf 3D AXIOMe, For Anet A8, For B9Creations B9Creator, For BEEVERYCREATIVE BEEINSCHOOL, For BEEVERYCREATIVE BEETHEFIRST, For BEEVERYCREATIVE BEETHEFIRST+, For BQ Hephestos, For BQ Hephestos 2, For BQ Witbox, For BQ Witbox 2, For CraftUnique CraftBot, For CEL Robox, For CraftUnique CraftBot 2, For CraftUnique CraftBot Plus, For Creality 3D CR-10, For Dremel 3D20 Idea Builder, For Dremel 3D20 Idea Builder for Education, For Dremel 3D40 Idea Builder, For Dremel 3D40 Idea Builder for Education, For FlashForge Creator Pro, For FlashForge Dreamer

Filament Diameter: 1.75 mm

Country/Region of Manufacture: China

Material: ABS

Brand: SUNLU

Type: Filament

Manufacturer Warranty: 1 Year

Unit Quantity: 2.2

Unit Type: lb

Available Variations

Color: Black

Price: 18.5 USD

Available Quantity: 90

Quantity Sold: 10

Color: White

Price: 18.5 USD

Available Quantity: 6

Quantity Sold: 6

Color: Black*2

Price: 33.39 USD

Available Quantity: 30

Quantity Sold: 0

Color: White*2

Price: 33.39 USD

Available Quantity: 0

Quantity Sold: 0

Color: Black+White

Price: 33.39 USD

Available Quantity: 1

Quantity Sold: 1

Color: Black*3

Price: 42.55 USD

Available Quantity: 20

Quantity Sold: 0

Color: White*3

Price: 42.55 USD

Available Quantity: 0

Quantity Sold: 0

Color: Black*2+White*1

Price: 42.55 USD

Available Quantity: 0

Quantity Sold: 0

Color: Black*1+White*2

Price: 42.55 USD

Available Quantity: 0

Quantity Sold: 0

Color: Black*5

Price: 60.89 USD

Available Quantity: 20

Quantity Sold: 0

Color: White*5

Price: 60.89 USD

Available Quantity: 0

Quantity Sold: 0

Color: Black*3+White*2

Price: 60.89 USD

Available Quantity: 0

Quantity Sold: 0

Color: Black*2+White*3

Price: 60.89 USD

Available Quantity: 0

Quantity Sold: 0

Color: Black*10

Price: 115.25 USD

Available Quantity: 19

Quantity Sold: 4

Color: White*10

Price: 115.25 USD

Available Quantity: 0

Quantity Sold: 0

Color: Black*5+White*5

Price: 115.25 USD

Available Quantity: 2

Quantity Sold: 2