Remote keyless entry Transmitter car starter key fob Autostart NAHAS2501 alarm

Description: This item is pre-owned – it will work like new once programmed to your vehicleready to program TESTED working 100% Blue LED Light One (1) Aftermarket remote keyless entry fob alarm Transmitter control clicker keyfob controller replacement Functions at 100% Tested & Guaranteed Autostart FCC ID: NAHAS2501 (Alternate Spelling: NAHAS25OI) Part number: TS01-2503DG AM FREQUENCY: 433.94 MHz LED COLOR: BLUE 5 BUTTONS COMPATIBLE WITH THE FOLLOWING SYSTEMS: AS-1735 AS-6270 AS-6270UAS-1755AS-6210AS-6250AS1735 AS1755 AS6210 AS6250 AS6270 AS6270U Programming Instructions Entering programming mode using the Hood Pin (or the P.B.) 1. Press and hold the hood pin down for 4 seconds. 2. Release the hood pin. The parking lights will turn ON for 1 second. 3. While the parking lights are ON, press the hood pin once more and release immediately. The parking lights will come ON solid for 20 seconds. You now have 20 sec. to select a submenu NOTE 1: To exit programming mode, close the hood. NOTE 2: For vehicles that require the ignition to be turned ON to activate the brake circuit, follow these steps to select a submenu: After flashing the hood pin, turn the ignition ON and wait for the parking lights to come ON (4 seconds). Then, press the brake pedal to access the sub-menus Warning! Please note that the wire to wire brake communication is locked once an analog signal is detected on the remote starter’s brake input. To detect D2D brake again, after being locked in “wire to wire” mode, make sure no connection is made at the brake input wire, unplug the remote starter’s power and then plug it back in PROGRAMMING THE TRANSMITTER TO THE MODULE 1. In programming mode (page 2) - the parking lights will stay on for up to 20 seconds 2. Before the lights go out, turn the ignition key to OFF (if not OFF already), then ON, then OFF. 3. Press and hold the LOCK button and keep it down until the parking lights flash 5 times quickly. 4. The transmitter has been stored in memory. Each unit can store 4 remotes in its memory. 5. You have 20 more seconds to select one of the sub-menus if needed. NOTE: To program a transmitter on the second vehicle for multi-car operation; press the TRUNK button (instead of LOCK ) in step 3 of the transmitter association procedure. We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged. Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement. Does this keyless remote entry come with a battery? Yes. It will have a working battery installed. Battery Condition: A. All remotes sold on Keyless4u include working batteries. B. Installed batteries are not tested for battery life- they are simply working. Some are new and some are used. Your vehicle will be installed with one of the following keyless entry systems: a. Standard Keyless Remote Packages: Installed at time of manufacture. b. Optional Keyless Remote Packages: Installed by a dealer. c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. d. No remote keyless entry system at all. The above information can change which remote you need for your installed remote keyless system.

Price: 35.18 USD

Location: Wellsboro, Pennsylvania

End Time: 2024-08-29T19:53:27.000Z

Shipping Cost: 6.96 USD