Midas HUB4 Monitor System Hub w/4 PoE Ports StageCONNECT & 16-Channel Outputs

Description: DJ GEAR INSTRUMENT GEAR LIVE SOUND RECORDING MICROPHONES HEADPHONES ACCESSORIES SOFTWARE LIGHTING BUNDLES Authorized Dealer - Full Warranty Midas HUB4 Monitor System Hub w/4 PoE Ports StageCONNECT & 16-Channel Outputs Monitor System Hub w/ 4 PoE Ports for Personal Mixers or Compatible Stage Boxes - Brand New - Description Personal Monitoring with DP48 Midas HUB4 is the multi-tool in your stage rack providing analogue and digital outputs for various applications. HUB4 can supply up to four DP48 personal monitor mixers with PoE (Power over Ethernet) and 48 channels of 24-bit / 48 kHz audio. HUB4 also collects 48 channels of upstream audio and forwards this audio to the FOH console, either from stage boxes connected to the AES50-B (THRU) Port or 8 return channels from each of Ports 1-4. Cascading Hubs for Large Setups To meet the challenges of large monitoring setups, HUB4 can easily be daisy-chained to make additional DP48 ports available, all the way up to symphonic orchestra applications. On the other hand, HUB4 can also address situations where you want to connect additional I/O via the same AES50 link to the mixing console. To help build out this AES50 console link, digital stage boxes such as the Midas DL16 or DL32 can be connected to the HUB4’s AES50-B (THRU) Port. The console can pass downstream signals to their respective stage outputs, while also receiving 48 channels upstream from the stage inputs via HUB4. Analogue Outputs for IEM Transmitters HUB4 features 16 balanced line-level outputs that can carry the 8 stereo mixes from the connected DP48 mixers for connections in the side rack. So there is no need to run additional lines from personal mixers to the transmitters, reducing setup time and reliability considerably. Alternatively, these analog outputs can also be used as spare outputs on stage receiving signals directly from the FOH consoles, e.g. for providing talkback or side-fill outputs. Support from Midas M32 Series Consoles HUB4 can convey control messages from M32 FOH consoles to DP48 personal mixers, as well as remote control messages between DP48 units. Midas DP48 Personal Monitor Mixers support remote control of other DP48 units and can also receive control information from M32 mixing consoles. This M32 control information includes assignments, names, and colors of channels, which are transmitted via AES50 for easy configuration of personal mixers. HUB4 can convey control messages from the FOH console to personal mixers as well as between personal mixers. This control message system works when DP48 units are connected to Ports 1-4 or to the ports on daisy-chained hubs. Midas DL8 PoE (Power over Ethernet) Powered Stage Boxes HUB4 easily interfaces with the new Midas DL8 stage box, which makes bulky analog sub-snakes a thing of the past. The DL8 stage box can be connected to one of HUB4 Ports 1-4 using only a simple CAT5E STP cable. This cable connection from HUB4 can directly power up to 4 stage boxes via PoE support – IEEE802.3at per port – allowing for shorter analog lines on stage. Remote Control Forwarding Through HUB4 HUB4 also facilitates one of the exceptional features of DP48 Personal Monitoring systems in which one DP48 unit can be designated as Master and used to control one or more DP48 units in Slave mode. HUB4 ensures that personal mixers are enumerated and that the Master, i.e., the DP48 connected to Port 1 of the first HUB4 in a daisy chain, can control the respective Slaves. This way either a tech-savvy bandmate or the technician can help talents on stage with their personal monitor sound. StageConnect – The Future of XLR HUB4 also features a designated StageConnect port on the rear panel, anticipating the future of XLR connectivity. What if any standard XLR or DMX cable could be used to transmit more than one channel of audio? What if that cable could transmit signals not only one way but bi-directionally? What if that cable would allow the passage of control data or even MIDI at the same time? What if a connected StageConnect device could receive up to 18 W of power through that same cable? Well, these capabilities are exactly what StageConnect delivers – a new interface standard to be released by Music Tribe after two years of development. This new standard comes with outstanding technical specs: 32 channels of uncompressed PCM audio in various I/O configurations, 24-bit at 48 kHz, below 0.5 ms of latency. For optimum performance and long cable runs 110 Ohm DMX-Cable is required. EtherCON CAT5E-STP for AES50 Remote Connections HUB4 uses rugged industry-standard EtherCon connectors to ensure stable operation in live production environments. For best performance, a good quality CAT5E STP cable, such as Klark Teknik NCAT5E-50, allows for remote operation. Controls & Connectivity HUB4’s large backlit front panel buttons show when a device is connected to the corresponding AES50 port and indicate whether the upstream signals are being sent to the desired outputs. Features/Specs Personal monitoring system hub with PoE remote powering for up to 4 DP48 personal mixers and compatible stage boxes AES50 IN and THRU ports for cascading hubs or stage boxes with 48 bidirectional channels at 48/44.1 kHz 16 balanced analogue outputs for sending 4x2 personal stereo mixes to IEM transmitters in the side rack Channel naming and Group assignments can be distributed from compatible M32 consoles Midas DL8 Stage Boxes can be connected and powered from ports 1-4 Personal mix outputs can be monitored via AES50 upstream to connected consoles Supports remote control forwarding of a DP48 personal mixer from another DP48 Front panel buttons for sending signals to analogue output groups 1-4, for StageConnect and for AES50-A upstream StageConnect output with phantom power for connecting other StageConnect devices, sharing 32-channel audio, 24-bit uncompressed PCM, 44.1/48 kHz, at sub-millisecond latency, over any standard XLR microphone or DMX cable Remote operation via shielded CAT5e cable up to 330 ft / 100 m length on all ports Features Neutrik etherCON AES50 network ports Rugged 1U chassis for durability in portable applications Auto-ranging universal switch-mode power supply Connections AES50 sync master / thru : 2 x RJ45 AES50 remote outputs : 4 x RJ45 Remote power : PoE (IEEE802.3at) USB : Type B StageConnect : 1 x XLR, male Analogue outputs : 4 x XLR, balanced 12 x 1/4" TRS, balanced Controls / Indicators Power : 1 x blue LED (button) AES50-A : 1 x green LED 1 x button LED, green/white StageConnect : 1 x green / white (button) 1 x green LED (port active) Ports 1 - 4 : 4 x button LED, green/white TO AES50-A : 2 x green LED AES50 - A / B : 2 x green LED (good connection) 2 x red LED (error) AES50 Audio channels : 48 Sample rate : 44.1 / 48 kHz Sample word length : 24 bit Clock synchronization : AES50 Sync Master Latency : min. 70 µs per node (AES50) Cable : shielded CAT 5e Cable length : max. 100 m (330 ft) StageConnect Audio channels in / out : 16 / 16 Sample rate : 44.1 / 48 kHz Sample word length : 24 bit Phantom power : +12 V DC / 18 W Latency : < 0.1 ms Cable : XLR balanced, mic or DMX cable Cable length : max. 40 m (132 ft) with DMX typ. 20 m with microphone cable Power Supply, Voltage, Current Consumption Switch mode power supply : Autorange, 100-240 V~50/60 Hz Power consumption : 180 W Mains connection : Standard IEC receptacle Dimensions Dimensions (H x W x D) : 50 x 482 x 291 mm (1.97 x 18.98 x 11.46") We are authorized dealers for all these brands. Click a logo to see our listings. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost. Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES. We provide free shipping to the contiguous 48 United States, on most items. Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost. We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit. We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service. Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. Please contact us for a Return Authorization before returning any items.

Price: 869 USD

Location: Winchester, Virginia

End Time: 2024-11-10T14:33:20.000Z

Shipping Cost: 0 USD