Cadillac STS-V XLR-V Supercharger Pulley System MPS

Description: This auction is for a Supercharger Modular Pulley System (MPS). These are made on programmable equipment and I've sold over 2500 systems and I've heard nothing but compliments. I've also been running one on my car for nearly 80,000 miles with no issues, check my feedback! If you have any questions please contact me via ebay or call at 651-503-2058. These pulleys are designed to replace the stock press on 8-rib, 2.8" pulley that comes installed stock from the factory. The pulley size you'd like is up to you but pulleys smaller than 2.55" will require the supercharger snout to be machined. A good rule of thumb is that for each 0.1" drop in pulley size you can expect to gain 1 pound of boost. This being said upgrading your 2.8" pulley to one of these great looking 2.55" pulleys should net you 2.5 - 3 pounds off increased boost. If you would like to use a pulley smaller than 2.55" or if you think that you may want to in the future I can machine your snout down and if you order a pulley system as well I will install it for you so you won't need to buy a puller / install tool or take it to a shop. What you'll need to do is remove the snout and send it to me or you can come by my shop in St. Paul, Minnesota. Please feel free to contact me if you have any questions. These pulleys look and perform great! They make swapping a pulley when you're going to the track or running high octane fuel a snap, then just swap back to a larger pulley when you want to do normal every day driving. Domestic shipping will be free for items bought through my Ebay Store! I can make ANY size (2.3-3.8 and any size in between) you would like, just email me after winning the auction to let me know what size you want Be sure to let me know in an email what size you'd like. The hub is made of Stainless Steel and the pulleys are billet aluminum. The pulleys are available in two finishes. These are Polished (add 5.00) and Machined. Included with each kit is the following: Pulley size and finish of choice Stainless Steel Hub 5 + 2 extra = 7 Stainless Steel Counter sunk screws Allen wrench for the screws This is a great mod for your supercharged STS-V or XLR-V to make MORE POWER!!! Feel free to email me with any questions or would like to order an extra pulley right away (one for the track and another for normal driving)! Please remember to check out my other auctions!

Price: 170 USD

Location: Saint Paul, Minnesota

End Time: 2024-07-21T22:58:21.000Z

Shipping Cost: 0 USD