'91-'97 Toyota Land Cruiser, '95-'97 Lexus LX450 FJ80

Description: This listing is for the full set of cupholders for the FJ80 FZJ80 Toyota Land Cruiser/Lexus LX450!!! The complete set includes:-1x Front Row Dual Cupholders-2x Left/Right Second Row CupholdersFront Row Cupholder Info:This FJ80 FZJ80 cupholder has a modular design that is intended to be adjustable for various sizes, anywhere between 2.500" and 3.600". From standard coffee cups or bottles to large sizes (Example: Most Yeti cups, 1 Liter Camelback, or 32oz/40oz Hydroflask) Design Features: The cupholder has keyed slots for locking/adjusting the insert rings in various positions. One keyed slot (vertical-horizontal locations) for sliding rings to the bottom of the cupholder, one keyed slot (x locations) for the top position. For holding larger containers, remove insert ring and stack to the other side (See detailed photos). This design avoids storing the rings in a compartment or potential misplacement. The cupholder is 3D printed PETG that will withstand high temperatures. Mounting footprint is designed to fit both 91-94 and 95-97 center consoles (LHD AND RHD Automatic Transmissions, NOT AVAILABLE FOR MANUAL) Installation Instruction: Thoroughly clean the surface of the mid console (THOROUGHLY! OR 3M DUAL LOCK ADHESIVE WON'T STICK PROPERLY. I KNOW HOW DIRTY YOUR LAND CRUISER CENTER CONSOLE IS) 1- Do a ‘mock-up mounting’ (without removing the adhesive backing) to position the cup holder to your liking. 2- Use a detailing brush or sponge and your favorite cleaner/soap to clean surface 3- Wipe down the surface with rubbing alcohol or grease wax remover and a clean microfiber cloth. Allow surface to fully dry. 4- Remove backing from the 3M Dual Lock Adhesive and mount cup holder onto the clean dry surface. Allow pressure and a cure time of 30min. With the 3M Dual Lock (included), the cupholder can be easily removed for cleaning or other reasons why you would remove them. The 3M Dual Lock 250 adhesive has a temperature resistance of 200 degrees F. Second Row Cupholder Info: The cupholders are designed for standard size coffee cups, water bottles, etc. and containers up to 3.250" in diameter. Features: -Door mounted. The cupholder is designed to replace the factory ash tray and will perfectly clip/bolt on. No hardware necessary. No drilling onto panels using wood screws (compared to other available products) -Low profile feature will not interfere when second row seats are fully folded (compared to other available products). This is the reason why the cup size diameter is limited to 3.250". -The product is 3D printed PETG that will withstand high temperatures. Interested in more 80-Series products? Check out my other listings. Mechanical Engineer designed. Graphics on AutoCAD. Rendering on Solidworks 2020. Printed on Prusa MK3S+. **Shipping Worldwide**

Price: 79.99 USD

Location: Rockaway, New Jersey

End Time: 2024-09-18T00:39:14.000Z

Shipping Cost: 0 USD