30ml BGA Tin Solder Paste Sn63/Pb37 Syringe Liquid Flux Welding Soldering Tool

Description: This Soldering Paste must be very useful if you are working on large SMD component, especailly the double side board. - 100% Brand New - Net Weight:36g - Good immersion - Joint high intensity - Color: Red -Suitable for : SMD/SMT/IC/BGA PASTE Package Included : 1 x 30ml/36g Soldering Paste Instruction - 1. Before the opening, the temperature of the solder paste should be raised up to the ambient temperature (more than 25degC), and the temperature return time should be about 3-4 hours. It is forbidden to use other heaters to raise the temperature instantaneously. - 2. After the solder paste is opened, it is recommended to use it within 24 hours at room temperature. - 3. Placed in the air for a long time, the solder paste will become a tin block due to moisture absorption. - 4. The indoor temperature should be controlled at 22-28 degC, and the humidity RH30-60% is the best working environment. - 5. To wipe the wrong substrate, it is recommended to use industrial alcohol or Preservation method: - 1. The solder paste should be kept at 1-10 Celsius. - 2. The solder paste should be used within 6 months. - 3. The solder paste should not be placed in the sun. Precautions: - 1. Use only with adequate Ventilation. - 2. The solder paste contains organic solvent. Avoid repeated contact with skin. If the solder paste gets on your skin, wipe it off with alcohol and rinse thoroughly with water. - 3. In order to be cautious, in the operation, the smoke released by the solvent during . operation should be avoided as much as possible, and the skin and mucous membrane tissues should not be contacted for too long. Avoid repeated breathing of vapor - 4. Avoid contacting with eyes. - 5. Keep away from children.

Price: 14.99 USD

Location: San Mateo, California

End Time: 2024-12-05T06:13:13.000Z

Shipping Cost: 0 USD